SAE 100 R6 Textile Reinforced Hydraulic Hose Used for Low Pressure Applications
SAE 100 R6 Application
Hydraulic hose SAE 100 R6 is to deliver hydraulic oil, liquid as well as gas. It can transfer petrol based liquid such as mineral oil, hydraulic oil, fuel oil and lubricant. While it’s also suitable for water based liquid. It’s ideal for all the hydraulic system in oil, transport, metallurgy, mine and other forestry. In a word, it’s suitable for all the middle pressure usages.
It’s ideal for:
Road machine: road roller, trailer, blender and paver
Construction machine: tower crane, lift machine
Traffic: car, truck, tanker, train, airplane
Eco-friendly machine: spray car, street sprinkler, street sweeper
Sea work: offshore drilling platform
Ship: boat, barge, oil tanker, container vessel
Farm machines: tractor, harvester, seeder, thresher, feller
Mineral machine: loader, excavator, stone breaker
Description
Different from SAE 100 R2, SAE 100 R6 is for low pressure use. Because it only has a single layer of fibre braid. The max work pressure of such hose is 3.5 Mpa. It’s similar with SAE 100 R3 in structure. But the difference is also the reinforce. R3 has 2 layers fibre, while R6 has only one.
Common problems on the surface of hydraulic hose SAE 100 R6
1.crack
The general reason for such problem is bend the hose in cold weather. Once this happened, check if the inner tube crack. If yes, change a new hose immediately. So, you’d better not move the hydraulic hose in cold weather. But if it’s necessary, do it in indoor.
2.Leakage
During the use, you may find the hydraulic oil leaks but the hose was not broken. That’s because the inner tube was hurt when deliver high pressure fluid. Generally, this happens in the bend section. Thus you have to change a new one. Besides, confirm the hose meet the requirement of bend radius.
